JUUPINE Double Sided PEI Honeycomb Building Board 256x268mm Printing Hot Bed For Anycubic Kobra 3/Kobra 3 Combo 3D Printer, Upgraded Etching Technology, 0.5mm Flexible Spring Steel Platform

【Double-sided textured etching plate design】The 0.5mm thickened stainless steel plate surface plate is etched to give the surface a unique square and honeycomb touch, which fits the model better, increases viscosity, does not warp during printing, is very durable and resistant to high temperatures. The 256mmx268mm spring steel plate for ANYCUBIC Kobra3/Kobra 3 Combo 3D printer has stronger adhesion after surface etching. Cleaning the Kobra 3 build plate before each use, excellent adhesion can be achieved. Users can adjust according to their actual printing needs. Parameter Suggestion: After leveling the platform, adjust the distance between the nozzle and the first layer of the hot bed to 0.1~0.2mm. It is recommended that the first layer of the model slice be set to 0.2mm. First layer speed is recommended 10~50mm/s. Print ABS, PETG class close blowing fan at first 3 floors. Close the blowing fan at the first floor when you print PLA. Depending on the recommended parameters for your consumables, it is recommended that the nozzle temperature of the first layer be 10 ° C higher than that of the other layers. It is particularly important to note:Do not use acidic, alkalinecleaners to wash (such as soap, washing powder, washing liquid, dish soap, etc. ), scrub with alcohol only before and after long-term use. Dry after scrubbing.